# What a label setup charge covers

> The four things inside a setup fee — file preparation, die, proof, make-ready — what each costs in time, and how to avoid paying for the same setup twice.

Pillar: label-cost · Updated: 2026-11

**Our view.** Setup is the line buyers try to negotiate and the line that is least negotiable, because it is mostly labour that has already happened. What is negotiable is whether you pay it again: a reorder at the same specification should not carry a second setup, and a supplier who charges one is either re-making the die or padding the invoice.

A setup charge is the least popular line on a label quote and the easiest to misunderstand. It is not a markup added to small orders; it is the labour and tooling that happen before anything is printed, and it exists whether you order 50 labels or 50,000.

Part of the [cost and ordering guide](/knowledge/custom-label-printing-cost/).

## What is inside it

| Component | What happens | Scales with quantity? |
|---|---|---|
| File preparation | Bleed, resolution, fonts, cut path, white ink, colour conversion | No |
| Die | Steel rule die for a custom shape, or a plotter path | No |
| Proof | Digital proof, contract proof or physical sample | No |
| Make-ready | Mounting, registration, colour adjustment, start-up waste | No |

Four one-off tasks, one line on the invoice. On a digital press the make-ready is short; on flexo it includes plates and a longer registration, which is why flexo setup is several times larger.

## How the cost behaves

The share, not the amount, is what matters:

| Quantity | Setup share of order value |
|---:|---:|
| 50 | 70–90% |
| 250 | 40–60% |
| 1,000 | 15–25% |
| 5,000 | 3–8% |
| 20,000 | under 2% |

That table is the reason a low minimum exists at all. It is also the reason a supplier quoting 50 units cannot "just sharpen the price" — there is nothing left to sharpen except the parts of the setup that were optional.

## What is optional inside a setup

Not all of it is fixed. These parts can be reduced:

- **The die** — a standard size or a kiss-cut sheet removes it entirely.
- **The proof type** — a digital proof is cheap, a press proof is not. A physical sample sits between them.
- **File preparation** — a correct vector file with bleed and a cut path removes most of this hour.
- **Combining designs** — three designs that share a material and size share one setup.

What cannot be removed: make-ready. The press still needs to be set up for the first label, whatever the quantity.

## Paying twice: the three ways it happens

**1. A revision after approval.** Any change to the file after the proof resets the proof, and often the make-ready. Even a text edit. This is the most common cause of a second setup on a job that was quoted once.

**2. A die that was not kept.** Some suppliers discard dies after a run, or keep them for a limited period. On a reorder the die is made again. Ask how long the die is held — a year is reasonable for a repeat customer, and it should be in writing.

**3. A different supplier.** A new printer cannot reuse another's die or another's press profile, so a reorder elsewhere carries a full setup even if the file is identical.

The rule that follows: **freeze the artwork before approving, and reorder from the same supplier while the die exists.**

## Is the setup charge fair?

Question it in three ways, in this order:

1. **Ask what it includes.** If the answer is "setup" and nothing more, ask for the four components separately.
2. **Ask whether the die is retained** and for how long, in writing.
3. **Ask what would remove it** — a standard size, a kiss-cut sheet, a simpler cut path.

Those three questions distinguish a real setup from a padded one. A supplier who can answer them is charging for work; one who cannot is charging for the number.

## Setup on a reorder: what should change

| Item | First order | Reorder, identical spec |
|---|---|---|
| File preparation | Yes | No |
| Die | Yes, if custom | No, if retained |
| Proof | Yes | Optional, digital only |
| Make-ready | Yes | Yes |
| Material | Yes | Yes |

A reorder should therefore be cheaper **per unit at the same quantity**, not just cheaper in total. If it is not, ask which line changed.

## What this means for buyers

**Treat setup as a fixed block, not a negotiation.** Negotiating it usually means removing something you needed.

**Freeze the file before approval.** One revision costs more than the difference between two suppliers.

**Ask how long the die is kept.** It determines whether your second order pays it again.

**Prefer standard shapes at low volume.** It is the only way to remove a setup without removing quality.

## Quick answers

**What is a setup charge in label printing?**

A one-off fee covering everything done before the press runs: file preparation, a die if a custom shape is needed, a proof for approval, and make-ready on press. It does not scale with quantity, which is why it dominates a small order.

**Should I pay setup again on a reorder?**

Not for file preparation, proof or make-ready if nothing changed. A die may be re-made if it wore out or was not kept, but a supplier who keeps dies for repeat customers should not charge a second die cost on an identical reorder.